Portland Design WorksFull Metal 700c Fenders(Return to Product Page)

I have a Kona Rove ST and have been looking for a nice set of fenders that will accommodate the 700x42mm tires I'm running. Have been regularly impressed with the quality and style of PDW products - no exception here. I did need to get some longer screws and rubber washers as the shape of the stay mounts and my frame eyelets weren't perfectly compatible - not a big deal though. Took my time and got them mounted. Great, rattle free coverage. Bonus to support a two Portland businesses.

I rode through a few Portland winters with cheaper fenders (SKS, Planet bike, etc) before I admitted defeat and finally bought a set of these. They RULE. Amazing coverage, solid mounting hardware, no more rattles and, not for nothing, they look good (and clean up nicely). As some other reviewers have mentioned, you might have to get creative with installation on some bikes, but once they are on they are a wet weather game changer. I can't recommend these highly enough.

These fenders are solidly built and look really good. The flaps that come with the fenders are adequate for riding solo but I'd recommend upgrading with a set of their leather flaps if you are regularly doing group rides in the rain. Your mates will appreciate it.

Installed on Specialized Roubaix matte black color. Installed easy. Fenders are matte black looking at bike hard to tell if bike has fenders. Fenders are very sleek. Front fender is mounted using a Sheldon Brown fender nut and stay. Rear fender is mounted using stay and plastic bracket attached to set tube. Front fender protects bottom bracket area. Rear fender protects bottom bracket, seat tube area. Both fenders protect me.

Well designed and well made, these are getting outfitted on every bike in my stable. They look clean and nice, attach rigidly without rattles, are super sturdy, and most importantly, they cover as much as they need to. Just a few inches off the ground in the front, and down past horizontal in the rear. (This is my biggest qualm with Mud Butlers, which don't cover enough.) These will keep your toes dry, and not spray everyone behind you. Nifty hardware and replaceable parts if you need them.

Got these fenders for my commuter and couldn't be happier. Super easy to install, have been keeping my feet clean and dry, and the metal construction makes them feel robust (and no annoying rattling). Get them!

Mounted on C'dale CAAD10 with Shimano1011spd brakes. These are very bike dependent. Tire clearance, brake model, and drop out design will determine your success. I found the provided skewer mounts to be sleek, but made removing wheels a pain. If you have very tight drop outs andor outboard protruding head screws for your derailleur hanger, these may not work well there either. I ended up getting some p-clamps and mounting to my seat stays and fork blades. Much easier. If you go this route, you may have to trim the adjustment rods to allow you to slide them in a bit further. The rear fender is very long, likely buddy-friendly. I ended up trimming about 6 off and relocating the rear stay mounting hardware further up on the fender. This made things much stiffer and less prone to noise. These did not work well on the rear with 11spd brakes, 10spd brakes provide more clearance (I traded with a friend). I also ended up drilling a couple holes around the rear brake bridge to secure it with a zip tie and stop any rattling. The provided rear brake mount is decent, but is a cantilevered design that can allow the fender to rattle against the rear brakebridge if its pressed up against it to get adequate clearance. The front on the other hand, I mounted as-is with 11spd brake and have enough clearance for a 25mm tire, though it is fairly tight on the sides. The sides are trimmed under the fork crown on the front to provide adequate clearance. So... I ended up heavily modifying these. Not ideal for $XX, but if your bike has more tire clearance or roomier dropouts, you may have better luck thank I did.

I had theses fenders mounted on my GT Grade and my first time out I wore my new cleated shoes but I stopped and couldn't unfasten them as I fell over with the bike on top of me. The rear fender caught me and popped loose from its mount but was undamaged and easily refit into place so that a bruised leg and ego were the only damage I sustained. Last night I took my bike out for a ride in the rain and was pleased that the fenders kept the water off of me and was channelling the spray forward and behind me. Adding the fenders to my bike was a very good move for me as they have already proven themselves to be a quality product, sturdily made, and very effective with wet road surfaces.

I was using a set of Planet Bike fenders which are a decent fender and fairly inexpensive. I purchased the PDW fenders because I thought they would match the look of my custom bike better. The PDW fenders are hands down the nicest fenders I have used and the setup was similar to SKS or Planet Bike fenders. Coverage is just right using the 45mm fenders with my rain bikes 32mm tires. One unexpected side benefit is I have less toe overlap with these fenders, probably due to the flat top profile.

Easy to install, look good and do a great job protecting me from the road grime.

I bought a new Milwaukee Beltline bike intended for winter and rainy-season commuting. Having a set of full coverage fenders is key to staying clean. Getting wet isn't an issue when riding (or you can use rain gear) but keeping the dirty street water from splashing up on you is essential. The PDW metal fenders look really nice and were somewhat easy to install. The instructions are good, but having never installed fenders before I had to fiddle with them a bit to get them set up right. So far so good in wet weather riding! I have the City fenders (45mm) and am using them with 700c x 35 Schwalbe tires. Perfect coverage. I have no issues with rattling or vibration.

I had to buy 3 extra bags of hardware to fit the fenders on my bike. The 60mm crown bolt doesn't go through my carbon fork all the way. The L bracket was too short, I had to buy one made 650b tyres, even-though I'm running 700s and one set of cilindar spacers for the chainstay bridge. You'd think a set of fenders this expensive will have the option to pick up the necessary hardware for free, but nope.

These are the best fender I have ever used and they look fantastic as well. I was tired of dealing with rattling and plastic crap. Installation may require shortening the stays, but cutting them is easy.

Excellent and flexible mounting options, solid and quiet, maximum coverage, look great. Be aware though that front coverage is such that wheel off fork founts won't work with these fenders. Not a criticism so much as a compromise required for dry feet.

A bit of creativity is required for the mounting of any fenders. These were about as straight forward as fender mounting gets. Mounted 2 pairs on two different models of the Salsa Vaya, both with disk brakes. Good ridgid feel to these fenders.

Great fenders but take over 3 hours to be installed by a professional at a bike shop.

Nicely designed, easy to install, but take your time to align. They function well, & look good. So, if you live where there is an over abundance of rain, (Pacific NW)...& need fenders to ride, these are good ones to have !!

These fenders are great. Installation takes a little time but is pretty easy. They are quiet when riding and protect like theyre supposed to.

All around a good well fitted fender set. Plenty of hardware to modify attachment options. Only weak point are the plastic termination points used for the wire stabilizers. One broke during install.

If you want great looking and great quality get these fenders from Portland Design works. The bike looks good with these fenders. And the keep your feet dryer with them.