Planet BikeCascadia Fenders(Return to Product Page)

All Likes - No Dislikes . I Put Planet Cascadia Fenders On All Of My Bikes .

I ride all 4 seasons, and you may have heard it rains on occasion here in Washington. I wanted a good quality fender for my new Lynskey Helix Ti road bike. With some modification (road bikes are not built with fender mounts) These work very well, keeping me drier, and more of the road git out of the running gears.

I would (and have) recommended these to a friend.

I got a turbo s for commute, but the 700c x45mm tier is hard to find a fender. This set have good coverage and easy to setup, not much noise, reasonable priced.

Good coverage for my 32c touring tires. No flashy planet bike logos. Fairly adjustable. Securing the rear fender to the bottom of the frame involves a zip tie... My Surly has a spot for a screw, but an additonal screw of appropriate length was not provided. The zip tie works for right now, but I am keeping my eyes peeled for an extra bike screw to replace it.

I have these fenders on my every day commuter mountain bike. The best fenders yet.

I really like these fenders since they have extended 'flexible flap' in front to help in keeping you dry, and the extended 'buddy flap' in the rear for happier group rides. I have actually bent the front, with my foot during a stop light departure, to the side of my wheel without any breakage or permanent damage. I have a set on two different rain bikes, and would buy a third set from BTD since they have good deals and stand behind their products.

These fenders were slightly bent out of the package so that the wheel would rub no matter how they were adjusted. Cheaply made and difficult to install. Would not recommend.

Bought on sale, good deal, but would not fit between fork legs on Specialized Allez. Despite the write-up and description at BTD website, do not count on the narrow size to fit all road bikes.

What can I say. Fenders. They keep snot off your bike and gear when it rains. These installed easily and work fine. So,... if you need fenders get some! I use these on my touring bike... but wouldn,t dream of putting them on a race bike for obvious reasons.

Probably the best full fenders out there, easy to install and the best wheel coverage with the super low flaps. Excellent price-value balance. Definately I recommend the product.

I use these for a daily 27 miles of commuting and weather can be unpredictable. These fenders have far exceeded my expectations. With the price of 10-speed chains, these fenders allow much less dirt and moisture to be thrown at the drivetrain from the front tire. If you are looking for full coverage fenders, paying a little extra for the Cascadia is worth it. The stainless hardware also looks nice. The struts are of sufficient length to bend around a disc brake versus using the standoff.

A great value because I got them on one of the many Biketiresdirect discounts. It rains so little in So. Cal. that I decided I would commute EVERY day. The fenders went on easily, have keep me dry on the two or three days this winter that I needed them and were well worth the money.

Like the saying You get what you pay for, these might not be the least expensive, but I think they offer the best VALUE. easy to install, sturdy, and good looking. Hard to beat.

Nice fenders, though somewhat expensive. Greater coverage than most, and come with long dropout eyelet bolts and spacers for mounting on disk brake-equipped bikes-the extra long bolts and spacers enable the fender struts to clear the brake calipers. Would be better if they had break-away strut mounts on the front for safety, but these are about the best mainstream fender sets for really wet conditions. The back is long enough to keep those drafting you clean, unlike 99% of other fenders on the market, and the front fender extends lower than most, also.

They work fairly well for protecting the rider, but the fender doesn't go down in the back far enough to protect a cycling close behind.

I am a year round rider. The fenders provide good coverage. They are light weight and easy to install, everything I want in a set of fenders

The two things I like best about these fenders are the extreme lightness and the completeness of the hardware and instruction that was included. Provisions were made for a couple of different likely mounting scenarios (as it turned out, my situation was a little different from either and required a compromise on the rear fender). Appearance of flimsiness is not a fatal flaw, if you can get them into the proper position, they will protect you from tire spray. Putting them in that position requires that you have an eye for how tension in a particular direction guides the shape of the attached object. I personally wish these fenders were aluminum, as the gain in weight would be small payment for the extra stiffness and the ability to bend them to fit your tire. The metal stays, which are long enough to allow adjustment to fit a range of tires, tend to stick up out of the fenders in a rather unattractive way.

If I could make one suggestion to Cascadia, I would ask them to be slightly less fanatical about the weight and add some reinforcing structure that would at least double the stiffness of the fenders while making them describe truer curves that would better align with the shape of the tires. In conclusion, I'll say that the other day I went grocery shopping on my bike in a sleet storm, and was in heaven except for one foot getting wet due to front fender leaning left. The fenders work, only real complaint is that I had an idea that for this price, they'd be perfect with all the little issues worked out. But they sure are light, and a competent bike fixer can make them do what they should do. I think they'll serve my purposes, though I worry about unforeseen trouble when I put my Big Apple tires back on in the spring...

Sturdy design, affordable and keep you dry. What's not to like?

I put these fenders on my speciialized secteur road bike, pretty easy to mount. You do have to be a bit creative as my bike didn't have tabs or mounting holes on the forks for the front fender struts and no hole to mount the lower part of the rear fender. Still not that hard to figure out! Once you get these on your bike, you will be glad, they really work well!