Park ToolIR-1.2 Internal Cable Routing Kit(Return to Product Page)

For internally routed bikes, this tool is a godsend. True, with a lot of patience, and often, a little luck, you can run your cables internally without this tool. The thing is this tool takes all of the patience and luck out of it. You just run the leader through with the magnet, attach the cablehose to the leader, and pull it through. Total frustration-saver!

This tool is ok for most common situations. But on bike frames that are less common with unique internal routing it's mostly not that helpful. It's very useful for simple internal routing. So it is handy to have when you do need it. Magnets are reasonably strong. But on thicker carbon they don't penetrate. So if it's not simple routing you might want to use careful planning before just assuming these will help.

Without a doubt one of the most useful tools in my workshop. If you have a carbon frame w/ complex internal cable routing this will save you loads of time and is easily worth twice what they charge for it.

Thought I didn't need this because my frame sections are big with easy access openings, but routing is way less fidgety with this kit.

Did a bunch of research on different cable routers and this looked most inclusive. It was a little more pricier but you can count on Park Tools performance and quality. Worked great and have options for all types of routing.

I used it on a Specialized Aethos to pass the hydraulic brake hoses. I couldn't have done it without it. A bike shop would have charged me almost the cost of the tool so it was worth buying.

I found that this kit lacked the most useful tool I needed to address my internal cable routing problem. A piece of cable liner is a must.

When I built my first road bike, I worried about routing the cable but with this tool, it made me confident and comfortable. Watched the instruction on youTube and did it.