Blackburn2013 AnyValve Pump Head(Return to Product Page)

Blackburn's lifetime guarantee is the real deal. During the past fifteen years they have replaced my worn-out pump twice, free of charge. Unfortunately, their warehouse did not have the AnyValve in stock when mine died recently. My subsequent purchase from Biketiresdirect arrived quickly, I installed the part easily, and my tires are once again feeling the love!

I was just about to throw away my old (usually) trusty hand pump until I found this. Perfect. Piece of cake to install. Now the old pump works like a charm on both type valves. Thanks.

I set this up along with a pressure gage for inflating high volume tubeless 29er tires. Works like a charm, and I haven't blown one off the rim since. Excellent value.

Great replacement head for my pump.

Fit exactly on my Blackwell Pump. Working perfect now!

I actually am not pleased with the design of the pump head. It's so hard to move the lever on the head, that it's easy to break. The replacement head is perfect for the pump though, and it was easy to install.

Easy to use head that holds tight to valve stem even at high pressures for tubular tires.

This Blackburn Valve works on my airtower pump.

I repair equipment for a week-long, cross-state bicycle tour in the midwest. We have eight various brands of bicycle tire pumps. 23 of the pump heads no longer sealed, or were the dual valve type that leaked through the opposite size when the head was clipped on either a presta or schraeder valve. I replaced all of the leaky heads with the Blackburn Anyvalve Pump Head in less than 5 minutes per pump. The Blackburn heads lock on tight without annoying leaking around the valve. There was nothing wrong with the pumps other than the leaking valve heads and this inexpensive replacement saved the cost of a new pump. I would recommend this pump head for anyone tired of the leaking, non-sealing pump head on their current bicycle tire pump.

This pump head is very easy to install. Super easy to use with presta valves.

Haven't used it with schraeder valves so far.

with over 100 bikes i pump a lot tires. for the price you cant go wrong.

This head was purchased to replace a no longer available Silca brass pump head with a lock. This head goes on to the hose quite easily and cleanly, fits both presta and schrader valves easily and locks on during pumping. Removal from the valve is very quick and efficient. Not quite as classy as the Silca but does the job.

Used to replace the nozzle on an older Blackburn floor pump. Despite the plastic handle, it seems sturdy enough.

If you own a Blackburn pump they will send this free as a warranty item. If you are looking to upgrade another brand, if it fits the hose it works great

This replacement Pump head is a simple inexpensive way to replace that worn out pump head that won't stay on the valve anymore.

Replaced a worn head with separate openings for Presta and Schraeder valvestems, on my Pedro's pump. But this new head seems just seems to slide off of smooth Presta valves, as though it either does not get sufficient pressure around the stem, or does not go far enough down the stem. In any event, have now switched to a screw-on head that always works at any pressure (to 200 PSI).

I have an old, nearly worn out, Blackburn pump. The pump head was totally gone. I looked for a new pump head but could only find expensive ones ($25-59) which were more than the old pump was worth. I discovered this Blackburn AnyValue head which was less than $5. Installed it in 30 seconds and had a functional pump once again. Now I use this pump as a travel pump. Still works well, and the pump head works perfectly!

I have an old Silca pump that I was thinking of trashing because the pump head didn't fit well (or easily or quickly) for either my road or mountain bike tires. For $5, I decided to try the Blackburn AnyValve pump head. It works perfectly and saved me the cost of a new pump.

I have thre floor pumps that have been in use for 25 years with many rebuilts and new heads. This was by far the least expensive and best working head yet. What is expecially nice is that it works well when the valve stem is a bit too short for the Silca hesds. My nex order will be purchasing a couple more

I use on a older blackburn floor pump I was actually going to throw away. I found this replacement for the original that didn't work well at all even when it was new. I now have a great pump. Used mostly on Presta valves.